394-14-54
0 to 80°C
(32 to 176°F)
max. 6 bar at 20°C
(87 psi at 68°F)
The Flowfit CPA25 flow assembly is designed for the realization of measuring points in water and wastewater treatment and industrial auxiliary processes. It offers space for three sensors and is able to extend their service life by keeping them wet even when the flow is interrupted. The assembly itself is also durable thanks to corrosion-resistant polypropylene. With Flowfit you get the right product exactly for your standard applications.
Flowfit CPA25 can be used in many applications in industrial auxiliary processes as well as in water and wastewater treatment. It is intended to be used in the following applications among others:
Drinking water
Water and wastewater treatment
Water cooling circuits
Osmosis plants
It is suitable for use with pressures of up to 6 bar.
Compact assembly with three Pg 13.5 sensor slots.
Special flow geometry to achieve reliable and stable
measured values from the installed sensors.
Siphon type profile to protect the sensors from drying out
during plant shutdown.
Service cover facilitates cleaning of the sensors and
assembly.
Calibration of the sensors to check they are functioning
correctly can take place while installed.
Стандартные продукты
Технический уровень
Простота
Простые продукты
Технический уровень
Простота
Стандартные продукты
Технический уровень
Простота
Высокотехнологичные продукты
Технический уровень
Простота
Специализированные продукты
Технический уровень
Простота
Вариативность
Выбор категории FLEX | Технический уровень | Простота |
---|---|---|
Выбор варианта Fundamental Выполнение основных измерительных задач | Технический уровень | Простота |
Выбор варианта Lean Простое управление основными процессами | Технический уровень | Простота |
Выбор варианта Extended Оптимизация процессов с помощью инновационных технологий | Технический уровень | Простота |
Выбор варианта Xpert Управление самыми сложными областями применения | Технический уровень | Простота Вариативность |
IDEA achieved tremendous cost savings through continous monitoring with the CA80PH Analyzer at their site in Wallonia
AVR Waste in Botlek, Rotterdam, processes up to 1.7 million tons of residual waste per year. Discover how they optimized their pH measurement thanks to Endress+Hauser
Thanks to Endress+Hauser the Wastewater treatment plant in Breuberg meets legal requirements and ensures safe phosphate elimination.
Using seawater to flush toilets can save a lot of drinking water. To ensure a constant water supply, the sensors used must function reliably to meet the water quality objectives (WQO).
Examination of wastewater, using the Liquistation CSF48 and the Liquiport CSP48 mobile, can provide valuable information about the occurrence of Covid 19 infections in a specific area
Стеклянный электрод
Water, Wastewater, Utilities
Flow assembly
Piping, bypass, branch line
'- Three PG13.5 sensor ports (shaft length 120 mm)
- calibration direct in the holder possible with a removable calibration cap
Holder: Polypropylene PP
Sealing: EPDM or FKM available
0 to 80°C
(32 to 176°F)
max. 6 bar at 20°C
(87 psi at 68°F)
Датчик кислорода
Water, Wastewater, Utilities
Flow assembly
Piping, bypass, branch line
'- Three PG13.5 sensor ports (shaft length 120 mm)
- calibration direct in the holder possible with a removable calibration cap
Holder: Polypropylene PP
Sealing: EPDM or FKM available
0 to 80°C
(32 to 176°F)
max. 6 bar at 20°C
(87 psi at 68°F)
Кондуктивные датчики
Water, Wastewater, Utilities
Flow assembly
Piping, bypass, branch line
'- Three PG13.5 sensor ports (shaft length 120 mm)
- calibration direct in the holder possible with a removable calibration cap
Holder: Polypropylene PP
Sealing: EPDM or FKM available
0 to 80°C
(32 to 176°F)
max. 6 bar at 20°C
(87 psi at 68°F)
Датчик кислорода
Water, Wastewater, Utilities
Flow assembly
Piping, bypass, branch line
'- Three PG13.5 sensor ports (shaft length 120 mm)
- calibration direct in the holder possible with a removable calibration cap
Holder: Polypropylene PP
Sealing: EPDM or FKM available
0 to 80°C
(32 to 176°F)
max. 6 bar at 20°C
(87 psi at 68°F)
Версия на русском языке - 01/2024 |
New version available in English
Наш телефон: +7 (499) 394-14-54, E-mail: info@gkprom.com |